B-22 Industrial Estate Near Pathankot Bye Pass Chowk Jalandhar, Punjab – 144012 (INDIA)

How Should the Workpiece be Positioned in Bench Vice?

How Should the Workpiece be Positioned in Bench Vice

Any workshop can benefit from using a bench vice, but it’s crucial to use it safely to prevent accidents and damage to your tools and materials. We will offer advice on how to use your bench vice correctly and safely in this article. These suggestions will assist ensure that you can use your vice effectively and without being hurt. They range from mounting the bench vice to your workbench to using the right size jaw for your workpiece to cleaning and storing your vice correctly. Take a moment to go through these suggestions, whether you’re a seasoned professional or a DIY enthusiast, to make sure you’re using your bench vice properly and effectively.

The best position to hold the job in the vice when filing is?

When working with a bench vice, you need to know how you should place an object in the vice when filing. Well, you need to place a workpiece on the elbow level when filing. Make sure to avoid placing it at eye level, arm level, or shoulder level when performing a filing operation on the object.

How the workpiece should be positioned in bench vice while cutting and filing?

When you work with the bench vice for cutting and filing the workpiece, make sure to place a workpiece close as possible to the jaws of the vice to avoid vibration when filing, sawing, etc.

What clamping position needs to be considered when you mount a vise on a workbench?

The vise needs to be placed in a way so that a long work piece can be gripped in vertical position in the vice jaws with no interference from the workbench.

What happens if the bench vice is over tightened?

If you overtight the bench vice, then it can cause damage to the spindle.

What material is used for bench vise?

Sometimes, bench vises are made of cast steel, but most of the bench vises are made of cast iron.

What precautions should be taken when using a bench vise?

In the tool room or workshop, a vise—also known as the third hand, which is a must. To keep material in position, vises are typically installed on workbenches or other sturdy supports. The majority of vises can be utilised for numerous tasks. Choose the best vice for the job that is sturdy enough.

  • When using striking tools or power tools on a workpiece held in a vice, wear safety glasses, goggles, or a face shield (with safety glasses or goggles.
  • Fasten a vice firmly. Put bolts in each of the holes on the vise’s base. Under the nuts, use lock washers.
  • Attach a vise so that the stationary jaw remains slightly beyond the workbench’s edge. Basically, it allows long work to be clamped in the bench vise without making interventions from the edge of the workbench.
  • Make sure the workbench is secured firmly to the base.
  • Ensure to check the vise for cracks before using it or clamping a workpiece in it.
  • Use a vice that is large enough to hold the workpiece without strain.
  • Keep the object in the bench vice close to the jaws to avoid vibration when performing any operation.
  • Instead of placing additional pressure on the vice, support the end of extra-long work with a saw horse, box, or adjustable stand.
  • Maintain a clean, lubricated, and debris-free environment for all threaded and moving parts.
  • When there is a chance that the job will be marked, use jaw liners in the vice.
  • Replace the worn-out jaw inserts and bent handle.

What to Avoid When Using a Bench Vise?

  • Try to avoid welding the vise base to any metal.
  • Don’t try to repair a bench vice by brazing or welding.
  • Don’t place a heavy rod in the light vice to bend it.
  • Avoid applying heavy pressure at the corner of the jaws of the vise.
  • Don’t use the vise jaws as an anvil.
  • Don’t hit the hammer on the handle of the vise to tighten beyond hand force.
  • For extra clamping, avoid using a handle extension.
  • Even if a vise has the slightest crack, don’t use it.
  • Don’t open the jaws of the vise wider than they were expected to be used.

Now, you know the answer to your question of ‘how the workpiece should be positioned in a bench vice while cutting and filing and with all these safety considerations, you can better use a bench vise.


When you start using a bench vice, make sure to follow safety precautions. Moreover, ensure to buy a bench vice from a trusted manufacturer of vices and for this, you can call Ajay Tools.